How to get DNA ID of your DMA card

Download and keep the DMA Cheats folder on your Second PC.
Download to the Main PC only those files that should be running on the Main PC according to the instructions.
Don't download and don't run DMA cheats on the Main PC.

1. Make sure that the switch on your DMA card is set to the ON position.

2. Turn off the Main PC and install the DMA Card in PCI express slot (x1, x4 or x16) of your motherboard.

3. Insert USB 3.0 cable into the JTAG port of your DMA card.

4. Insert the other side of USB cable into a USB 3.0/3.1/3.2 port on your Second PC.

5. Turn on your Main and Second PCs.

6. On the Second PC go to the folder DMA Cheats\2. Firmware\100T\1. CH341PAR driver\CH341PAR and run SETUP.exe.

P.S. This driver is the same for 35T, 75T and 100T cards.

7. Click INSTALL.

driver installation for dma card 35t 75t 100t

8. You should see a sign "Driver install success!".

P.S. If you see a sign "The driver is successfully pre-installed in advance" — this means that you most likely connected the cable to the DATA port, and not to the JTAG. Check and fix it.

9. On your Second PC go to the folder DMA Cheats\1. DMA Card\DNA ID 1st method.

10. If you have 35T card → run CH347-35T.bat file.

If you have 75T card → run CH347-75T.bat file.

If you have 100T card → run CH347-100T.bat file.

11. You will see a window like this. Copy full DNA ID as a text. It should look like this:

001101000001011010100100100010010001010100111000001011100
(0x00682d49122a705c)

If you got an error

12*. If it shows an error instead of DNA ID, you need to run a different file:

If you have 35T card → run 35T.bat file.

If you have 75T card → run 75T.bat file.

If you have 100T card → run 100T.bat file.

13. After that, send your DNA ID to the Manager.

If you have any problems getting the DNA ID, contact the Manager for assistance.

Video Manual

Driver Installation Error

Make sure that you exctracted all the files from WinRAR.

Error getting DNA ID

Make sure that you connected USB cable to JTAG port, not DATA (this is the most common problem. even if you think that the cable is already in JTAG, try connecting it to another port, you may be mistaken).

Second PC doesn't see DMA card

Try to install DMA card into a different PCIe slots on your motherboard.
Try to connect USB cable to a different USB port on your Second PC (make sure it's USB 3 port).
Try to change USB cable (make sure it's USB 3 cable).

Other issues

If none of the above helps, the problem may be with your second PC (for example, it is too old or it has custom Windows installed).

In this case, you can try replacing your Second PC.
If you don’t have another PC, try getting the DNA ID using your Main PC. To do this, connect the USB cable to the Main PC and follow all the steps in this guide on it.

Where to download?

You can download DMA Cheats folder here — https://www.dma-cheats.com/download

Firmware file (.bin) is unique and is developed for each customer individually, you can buy it here —

https://www.dma-cheats.com/firmware

tools, drivers for dma card, firmware, kmbox, makcu, fuser, dma cheats, xim matrix

See all Products →