Arduino ESP32 MAKCU Guide
Manual how to connect, set up, update and activate Arduino ESP32 MAKCU to use it with DMA cheats and solve possible errors.
This guide will not work other models of arduino.
INSTALLATION
TROUBLESHOOTING
DOWNLOAD
Recommended Hardware
Recommended USB cable — you can use any USB 2.0 or 3.0 cable
Recommended mouse — any except ROG Omni receiver, vaxee np01s v2 wireless usb dongle, Razer Viper 8k, HyperX plusfire hastle, Mouse Gamer Motospeed V70, Corsair Nightsword
If you don't have a Second PC we recommend — Mini PC
Recommended OS — Windows 10 or 11
Flashing MAKCU
-
Download and keep the DMA Cheats folder on your Second PC.
1. Go to folder DMA Cheats/7. Arduino MAKCU and run MAKCU.exe on your Second PC
2. Hold the left button on MAKCU and at the same time connect USB cable from Second PC to the left port on MAKCU
After connecting, you will see this text in MAKCU application
.png)
3. Click Flash Left, select MAKCU_LEFT.bin wait for process to complete
.png)
4. Unplug USB cable from MAKCU
5. Hold the right button on MAKCU and at the same time connect USB cable from Second PC to the right port on MAKCU
6. Click Flash Right, select MAKCU_RIGHT.bin and wait for process to complete
.png)
Obtain the CH343 driver
1. On the Second PC go to DMA Cheats\7. Arduino MAKCU\CH343 Driver
2. Right click on CH343SER and click Install
COM port
1. Connect USB cable to the middle port of MAKCU and to your Second PC
2. On the Second PC, go to Device Manager and open Ports tab
.png)
3. You will see USB-Enhanced-SERIAL CH343. In my case it has COM5. Remember this number. Right click on the USB-Enhanced-SERIAL CH343 and to go properties
4. Go to Port Settings tab and click Advanced
5. Select a COM number below 10, different from the current one. For example, I'll select COM1. Click OK to save
.png)
If you have the MAKCU tool open, close it and restart MAKCU by unplugging and replugging the USB cable.
After completing all the steps, the flash process should be completed.
Connecting and testing
1. Connect USB cables to MAKCU as shown below
2. Go to folder DMA Cheats/7. Arduino MAKCU and run MAKCU.exe on your Second PC
3. Click Test
If your cursor on Main PC teleports, everything is working properly
How to use with Xim Matrix
1. Connect, set up and install necessary driver for Xim Matrix, according to this guide
2. Connect MAKCU to the Main and Second PC as shown below
Don't try to connect MAKCU directly to Xim Matrix, follow our diagrams
3. Launch a game you are going to play.
Make sure that the output devices in the game settings are be mouse and keyboard
4. Launch DMA cheat, set up aimbot if you haven't done it yet.
Everything is ready, your gamepad emulates the operation of the mouse and keyboard, and when you shooting on gamepad, the aimbot will work according to the settings of your cheat
I recommend watching the Video Manual to get it right.
You can also visit the Xim Matrix developer's website to find more information on setting it up and troubleshooting — https://guide.xim.tech
Video Manual
Mouse Operation Bugs
If you encounter a mouse bug, follow these steps:
-
Ensure the flashing process has been followed correctly.
-
Press Log Enabled. This will reboot the device.
-
The device will start logging in the terminal. You can disconnect the left USB port and the mouse, keeping the 2nd PC connected.
-
Connect the left USB port to the main PC, then connect the mouse. Make a ticket in the server, Press User Logs and submit the logs in the ticket.
The dev will review the logs and work on fixing the mouse bug.
MAKCU startup issue
When you turn on the main pc, you have to reconnect Makcu for the mouse to work.
Mouse not passing AIO test
If your mouse does not pass the move test, restart the AIO then try again.
Mini pc blocking MAKCU
There is a chance your mini pc is blocking Makcu from working, currently the ch340 chip on board's is blocking Makcu.
Some chairs will default to ch340 over ch343, and it will block Makcu from connecting.
How to check if you have CH340?
Open up Device Manager.
Then find Ports(COM & LPT) and open the list.
You will see USB-SERIAL "CH340" if you don't have it then your safe from this issue.
A temporary solution:
1. Uninstall Ch340 from Device Manager
2. Just uninstall it before opening your cheat every time
Note: this is not a permanent fix, and cannot be resolved. its not a Makcu issue, its due to the way cheats default kmbox b pro and arduino over Makcu
MAKCU works but cheat doesn't
If you use cheat from another provider (not from dma-cheats.com),
-
Your cheat doesn't support Makcu
-
Tell your cheat provider on how to add support
Aimbot is not Working
If the Kmbox test was successful, but Aimbot doesn't work in the game with directcheats:
Make sure that you have started the cheat in mode with Kmbox. Do check it go to
C:\Users\*username*\Documents\directcheats.store
You will see .cfg files of your games.
If you are playing Call of Duty, open MainCOD.cfg via Notepad
Find the line "I_DONT_HAVE_KMBOX"
If you want to play with Kmbox it should be written "I_DONT_HAVE_KMBOX = ": false,
Save it and close the file.
After you launched a game and the cheat you need to enable Aimbot and set it up through menu.
Make sure that you have configured everything correctly.
Where to download?
You can download DMA Cheats folder here — https://www.dma-cheats.com/download
